Plum XLD Hospira (Abbott) Infusion Pump

Get A Quote

Save up to 80% on pre-owned Hospira (Abbott) Plum XLD infusion pumps.
Request a Quote for this product now.

Product Specifications


Approximately 8.25H x 7.5W x 8.75D inches (including pole clamp)


Approximately 7.75 lbs (with battery)


High-impact plastic

Power Requirements:

100-130 Vac, 50 to 60 Hz, less than 35 W

Power Cord:

Hospital-grade AC (mains) cord. 10 feet long, with transparent plug


0.5 A, 250 V. slo-blo


Sealed lead-acid rechargeable 8 V battery, internal to infusion system. Accessible for ease of field replacement, with color-coded leads and polarized connector.

Battery Operation:

A fully charged new battery will provide eight hours of operation at 125 ml/hr, or 1000 ml total volume delivered, whichever occurs first


The battery charges whenever the infusion system is connected to AC (mains) power. If the infusion system is operating at 125 ml/hr, a full recharge takes approximately 16 hours. If the infusion system is turned to OFF/CHARGE, recharge takes approximately eight hours.

Delivery Rate Range

Micro Mode:

.1 to 99.9 ml/hr

Macro Mode:

1 to 999 ml/hr (in 1 ml increments)


1 ml/hr

Dose Limit Range:

1 to 9999 ml/hr (in 1 ml increments)

Occlusion Range:

10 psig (+5, -2 psig)

For service, parts, PM or rental see our Services section