Hospira (Abbott) Plum 5000 Infusion Pump

Get A Quote

Save up to 80% on pre-owned Hospira (Abbott) Plum 5000 infusion pumps.
Request a Quote for this product now.

Product Specifications


Approximately 18 x 23 x 23 cm (7 x 9 x 9 in), excluding pole clamp protrusion and power cord storage


Approximately 6.0 Kg (13 lb), with battery


High-impact plastic

Power Requirements:

110-120 VAC, 50/60 Hz, 30 W

Power Cord:

Hospital-grade AC cord. 8 ft long, with transparent Plug and retainer plate


0.5 A, 250 V, Slow Blowing


One sealed, lead-acid, rechargeable 8 V battery, Internal to device. Accessible for ease of field replacement, with color-coded leads and polarized connector. Battery life (new batteries, full charge, at 20 C) approximately 500 mL total volume delivered or six hours of operation, whichever occurs first.

Delivery Rate Range

Micro Mode:

0.1 to 99.9 mL/hr (in o.1 mL. Increments) The total of the primary rate plus the secondary rate cannot exceed 99.9 mL/hr in Micro Mode. Note: while using the concurrent delivery feature in the Micro Mode, neither the primary rate nor the secondary rate can be less than 0.5 mL/hr.

Macro Mode:

1 to 999 mL/hr (in 1 mL increments the total of the primary rate plus the secondary rate cannot exceed 700 mL/) in 1 mL/hr in Macro Mode

Dose Limit Range

Micro Mode:

0.1 to 999 mL (in 0.1 mL increments)

Macro Mode:

1 to 9999 mL (in 1 mL increments)

Operating Backpressure


-2 to 10 psig. The maximum pressure is user-selectable from 1 to 10 psig, via the front panel touch switches.

Secondary Doses:

For dual-channel delivery, a single dose of a secondary fluid may be administered
For multidose delivery, 1 to 24 doses of a secondary fluid may be administered at intervals from 15 minutes to 24 hours

Occlusion Alarm


The Distal Occlusion alarm sounds within two pumping cycles after the distal set tubing or set outlet fitting becomes occluded


The Proximal Occlusion alarm sounds within five pumping cycles if the tubing proximal to the cassette becomes occluded


The Stopped Air In Distal Line alarm will sound if a bubble 100 uL or larger passes the distal air-in-line sensors (alarm may actually sound at detection of a bubble as small as 50 uL)


The Stopped Air In Proximal Line alarm will sound if approximately 1200 uL or more passes through the proximal air-in-line sensors

For service, parts, PM or rental see our Services section