Baxter 6301 Infusion Pump




Get A Quote

Save up to 80% on pre-owned Baxter Travenol 6301 infusion pumps.
Request a Quote for this product now.

Product Specifications

Dimensions:

32.5 cm W x 13 cm D X 29 cm H (13 in W x 5.1 in D x 11.4 in H)

Dimensions:

12.0″ x 14.75″ x 7.5″ (30.5 cm x 37.5 cm x 19.1 cm)

Weight:

8.1 Kg (17.9 lb)

Battery:

12 volt, 2.0 ampere, sealed lead acid

Battery Recharge:

80% charged within 8 hr.

Battery Life:

6 hr at 1-1,400 mL/hr (4 hr with both channels operating at 1-1,400 mL/hr)

Power Cord:

Biomed replaceable 2.75 m (9 ft)

Leakage Current:

Less than 50 micro-amps (per UL 544)

Fuse:

.8 ampere, 250 volt, slow-blow

Communications Port:

RS232 serial port

Operating Environment:

15.5-37.7ºC (60-100ºF)

Power Requirements:

115 VAC, 60 HZ, 50 W

Flow Rate Range:

Primary program: 1.0-99.9 mL/hr in 0.1 mL increments or 1-1999 mL/hr in 1 mL increments.Upper limit can be reduced by authorized service personnel.
Secondary program: 1.0-99.9 mL/hr in 0.1 mL increments or 1-999 mL/hr in 1 mL increments

VTBI Range:

1.0-99.9 mL in 0.1 mL increments or 1-9999 mL in 1 mL increments for both primary and secondary. Upper limit can be reduced by authorized service personnel.

Ramp PDP Parameter Ranges:

Total VTBI: 100-9,999 in 1 mL increments. Upper limit can be reduced by authorized service personnel.
Delay Time: 00:00 – 08:00 hours in minute increments.
Run Time: 01:00 – 16:00 hours in minute increments.
Ramp Up: 00:00 to 45% of the Run Time, in minute increments.
Ramp Down: 00-00 to the Run Time minus Ramp Up, in minute Increments.

Air-in-Line Detection:

Factory set to NORM, which causes the pump to alarm on air bubbles approximately 75 uL or larger. The MIN setting causes the pump to alarm on air bubbles approximately 50 ul or larger.

For service, parts, PM or rental see our Services section